BLASI – JUNG intermediate frame,
BLASI – JUNG intermediate frame is a slim thermoplastic frame used in BLASI‑associated JUNG‑type switch plates to hold an intermediate‑height or smaller switch insert behind a standard JUNG design‑frame. The intermediate frame sits between the JUNG face‑frame and the wall or panel, allowing thinner or non‑standard devices (for example sensors, low‑profile sockets or special BLASI‑related modules) to be mounted flush while keeping the outer JUNG cover frame and plastering line straight. BLASI lists this simply as “JUNG intermediate frame” in its spare‑parts context, so technicians typically source a JUNG‑supplied 50×50 mm or 55×55 mm intermediate frame that matches the JUNG LS‑range design and mounting‑hole pattern used on BLASI‑area operator‑tube or wall panels.
Product Details
BLASI – JUNG intermediate frame is part of the JUNG LS‑switch‑range ecosystem, designed to standardize the appearance of mixed‑device installations where some components are thicker or shallower than others. For example, when BLASI‑area contractors need to mount a JUNG key‑switch, push‑button or BLASI‑compatible sensor behind a JUNG face‑frame, the intermediate frame brings the insert to the correct height so that the outer JUNG frame lies flat and even with the wall or operator‑tube surface. This avoids gaps or tilting around the edge of the plate and keeps the overall look neat and vandal‑resistant, which is important in high‑traffic automatic‑door or barrier environments. The frame is typically made of high‑gloss thermoplastic (ivory, black, or white) and can be mounted both horizontally and vertically, following JUNG‑range recommendations.
Because BLASI only references this item as “JUNG intermediate frame,” service staff match the JUNG model number (for example LS‑961 Z5 or LS‑961 Z SW) to the JUNG face‑frame used on that BLASI project. The intermediate frame is intended for indoor or lightly sheltered installations, where it is protected by the BLASI panel or wall finish but still accessible if the face‑frame is removed. By using BLASI – JUNG intermediate frame, installers and BLASI‑area technicians achieve a clean, consistent interface for mixed‑height JUNG inserts, helping to keep the operator‑tube and entrance aesthetics aligned while simplifying the mounting and alignment of BLASI‑related electrical hardware.
Article No: 7900079
Additional information
| Brand | BLASI |
|---|
