BLASI – LED 3mm red diffus 30° 400mcd Rohs
BLASI – LED 3mm red diffus 30° 400mcd RoHS is a standard 3 mm round through‑hole indicator LED with a diffused red lens, used by BLASI as a status or fault LED on control boards, door‑status panels, or barrier cabinets. It has a viewing angle of about 30°, typical luminous intensity of 400 mcd, operates around 1.9–2.3 V at roughly 20 mA, and is supplied in a RoHS‑compliant package (lead‑free, compliant with electronics‑directive requirements). The “diffus” lens spreads the light slightly, making it easy to see at close range while reducing glare of the LED 3mm.
Product Details
This BLASI‑labeled 3 mm LED is a low‑power, general‑purpose diffused red indicator commonly used on BLASI control boards for power‑on, fault, safety‑edge, or door‑status indicators. The 30° beam angle concentrates the light enough to be clearly visible from the front of the panel, while the diffused housing softens the spot so the LED is readable from a small range of angles without being painfully bright. The 400 mcd brightness is moderate: enough to be visible in indoor or shaded BLASI environments without needing high drive current.
The diode runs on a forward voltage of about 1.9–2.3 V at 20 mA, so it is typically driven via a series resistor from 5 V or 24 V BLASI control rails, with the resistor value chosen to limit current and protect the LED. Being RoHS‑compliant, the device is lead‑free and suitable for modern BLASI electronics, fitting BLASI‑brand PCBs and panel‑mount holders without violating environmental or material‑safety standards. By using the BLASI – LED 3mm red diffus 30° 400mcd RoHS, BLASI gets a compact, reliable, and standardized indicator that supports clear visual feedback for maintenance and end‑users without over‑complicating the wiring or component palette.
Article No: 8320000
Additional information
| Brand | BLASI |
|---|
