Emergency stop switch, start button, Push button, Inductive proximity switch, Magnetic logic contact, tappet contact, Micro Schalter, Magnetic contacts, Micro snap switch, Microswitch, Magnetic switch bistable, Light barrier receiver, Key switch, Kit key reversing switch, Operating switch, Switching element, Key operating switch, Key operated switch, 2 key operating switch, Key operator switch, Linear control switch, Front shield

BLASI – Microswitch (for locking)

Name: BLASI - Microswitch (for locking) - MaceGulf
SKU: BLSP-7930010

BLASI – Microswitch (for locking) is a small snap‑action switch used inside or near BLASI locking mechanisms to confirm when the door is locked or unlocked. The BLASI – Microswitch (for locking) is actuated by the moving parts of the lock, changing its contact state when the latch or bolt moves into or out of position. It provides a clean, low‑voltage signal to the BLASI control unit, enabling the system to monitor lock status for interlock, safety and alarm functions. With a compact body and robust construction, BLASI – Microswitch (for locking) suits automatic doors and barrier systems where reliable, non‑visual locking‑state feedback is required.

Enquire Product

Product Details

BLASI – Microswitch (for locking) is integrated into BLASI electromechanical or electric locking units to send a precise “locked” or “unlocked” signal to the automatic‑door control panel. When the lock mechanism moves between engaged and disengaged positions, the plunger or lever of the BLASI – Microswitch (for locking) is pushed or released, causing the internal contacts to snap‑open or snap‑close. This action generates a discrete ON or OFF signal that the BLASI control unit can use for safety checks, interlock logic or status indication without needing external sensors. The compact, sealed body protects the contacts from dust, vibration and wear, which is important in high‑traffic entrances.

Designed for low‑power signaling rather than heavy loads, BLASI – Microswitch (for locking) is typically wired as a normally open or normally closed contact depending on the system logic. It can be mounted on brackets, casings or internal locking plates, keeping the actuator aligned with the moving part of the lock. By using BLASI – Microswitch (for locking), installers gain a simple, factory‑fitted monitoring point that helps maintain accurate lock‑status reporting and supports safe, code‑compliant operation in BLASI‑based automatic‑door and barrier systems.

Article No: 7930010